1. Inizio pagina
  2. Contenuto della pagina
  3. Menu principale
  4. Menu di Sezione
Home Page
Components
Menu Home / Components / Solenoid Valves
Contenuto della pagina

SOLENOID VALVES

 
 
Solenoid valve 2/2 Way type 6011

Solenoid valve 2/2 Way type 6011

Valve 6011 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. In combination with a plug in accordance with DIN EN 175301-803 Form B or C, the valves satisfy protection class IP65.

Discover the product
Solenoid valve 2/2 way Type 6013

Solenoid valve 2/2 way Type 6013

Valve 6013 is a direct-acting plunger valve. Various seal material combinations are available depending on the application. Optional manual actuation enables quick commissioning and easy maintenance. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X. Direct-acting and compact valve up t o diameter of DN 6.0. Vibration-proof, bolted coil system. Increased leak-tightness with welded plunger guide tube. Explosion proof versions. Energy-saving pulse versions.

Discover the product
Solenoid valve 2/2 way Type 6213

Solenoid valve 2/2 way Type 6213

2/2 Way Servo-Assisted Diaphragm Valve Normally Closed. A minimum differential pressure is required to fully open the valve. The standard version is suitable for use with liquids. A special version (HP00) is available for gas and vacuum applications in which the valve opens without differential pressure. Various combinations of membrane and body materials available. With the use of a connector in compliance with DIN EN 17301-803 form A, the valves meet the requirements of IP65 and NEMA 4X degree of protection.

Discover the product
Solenoid valve 2/2 way Type 255

Solenoid valve 2/2 way Type 255

High performance direct operated solenoid valve with integrated metal gasket in the body and wear-resistant stainless steel seat. Three-way versions (Type 0355), for high pressures (up to 100 bar) and for high temperatures (up to 250 ° C) are also available.

Discover the product
Solenoid valve 2/2 way Type 290

Solenoid valve 2/2 way Type 290

Servo-assisted membrane solenoid valve that opens without differential pressure. Suitable for neutral and empty fluids. Membranes in different materials are available. The valve bodies can be in stainless steel and gray cast iron. The magnetic coils are encapsulated with epoxy resin resistant to chemical agents. In all DC variants there is the "Kick and Drop" electronics integrated in the coil, for the reduction of electrical consumption. With the use of a connector compliant with DIN EN 17301-803 form A, the valves meet the requirements of IP65 / 67 and NEMA 4X protection degree.

Discover the product
Solenoid valve 2/2 way Type 330

Solenoid valve 2/2 way Type 330

Solenoid valve with direct actuation at anchor. The innovative design guarantees airtight insulation. The figure shows the threaded version. It is also available in a sub-base mounting version (type 0331 on request). 2/2 way normally closed operation. ATEX version available. Suitable for aggressive alkaline and acid solutions.

Discover the product
Solenoid valve 2/2 way Type 5281

Solenoid valve 2/2 way Type 5281

Servo-assisted solenoid valve with servodiaphragm for the control of liquid or gaseous media. A pressure difference of 0.5 bar is  required for a complete switchover. Universal version up to 16 bar.  NBR, EPDM or FKM servo-diaphragms. Anti-waterhammer, low noise. NC or NO circuit function. Brass body or grey cast iron. .Threaded port or flange connections.

Discover the product
Solenoid valve 2/2 way Type 5282

Solenoid valve 2/2 way Type 5282

Type 5282 is a pilot actuated solenoid valve using a servo diaphragm. A separating diaphragm totally isolates the magnetic drive and the fl uid. The valve is designed for universal use with gases and liquids. Type 5282 is
the only true full stainless steel and full brass valve. Pivoted armature pilot drive with manual override.  Magnetic drive completely isolated from fluid by diaphragm. Circuit function can be changed (NC or NO). Adjustable switching times (anti-waterhammer). Tolerates slightly contaminated and aggressive fluids.

Discover the product
Pilot Solenoid valve 3/2 way type 6012/6014

Pilot Solenoid valve 3/2 way type 6012/6014

Directly actuated 3/2 way normally closed solenoid valves, controlled by a shutter and designed to adapt easily and safely to Bürkert process valves. Ideal for piloting with compressed air.

Discover the product
Solenoid valve 2/2 way Type 5404

Solenoid valve 2/2 way Type 5404

Servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are moulded with high-quality epoxy resin. In combination with a plug to DIN EN 175301-803 Form A, the valves satisfy degree of protection IP65. The plug is not included and must be ordered separately. Diameter of up to DN 25. Vibration-proof, screwed coil system. Moulded housing with high surface quality. Explosion proof versions. Suitable for gas and steam applications.

Discover the product
Solenoid valve 3/2 way Type 6012

Solenoid valve 3/2 way Type 6012

Direct-acting 3/2-way miniature solenoid valve is available in two versions. Type 6012 standard is used for blocking, dosing, fi lling and ventilating neutral gases and liquids, in particular for the control of single-acting pneumatic actuators or for technical vacuum. The modular valve may be mounted singly or in block assembly on a multiple manifold. Type 6012P was developed as a special pilot valve for direct attachment to externally  piloted pneumatic actuators. It consists of the solenoid actuator of Type 6012 and a special connection housing with banjo bolts for simple connection to the pilot air port of the actuator. The valve is equipped with manual override as standard.

Discover the product
Solenoid valve 3/2 way Type 6014

Solenoid valve 3/2 way Type 6014

3/2 way solenoid valve with direct drive F. Threaded for single or sub-base mounting, it is used for neutral fluids and is also suitable for technical vacuum. Nominal diameter up to DN 1.6 mm. IP65 protection degree. Nominal diameter up to 2.5 mm. Pressure range 0-10 bar max. Fluid temperature from -10 ºC to +100 ºC. Ambient temperature from -10 to + 55 ºC.

Discover the product
Solenoid valve 3/2 way Type 0340

Solenoid valve 3/2 way Type 0340

Servo-assisted 3/2-way piston valve. A minimum differential pressure is required to operate the valve. The function of the valve can be easily switched from NC to NO by 180 ° rotation of the 3/2 way pilot. The 0340 valve is equipped with a manual control useful for commissioning and tests. To contain the energy requirements, all the coils can be supplied with an electronic reduction of power or in impulse configuration. In combination with a connector in accordance with DIN EN 17301-803 form A, the valves meet the requirements of protection degree IP65 / 67.

Discover the product
Solenoid valve 2/2 way Type BR24

Solenoid valve 2/2 way Type BR24

2/2-way solenoid valves. Force-pilot operated piston design. No differential pressure is necessary for
operation. NC standard function, NO (on request). ) the valve closes with spring powerdirect acting without differential pressure. Body materials Stainless steel, cast iron, cast steel. Maximum pressures up to 40 bar. DN65 ... DN300 mm passages, flanged connections.

Discover the product
Solenoid valve 2/2 way Type BR37

Solenoid valve 2/2 way Type BR37

2/2-way solenoid valves. Force-pilot operated piston design. No differential pressure is necessary for
operation. NC standard function, NO (on request). ) the valve closes with spring powerdirect acting without differential pressure. Body materials Stainless steel, cast iron, cast steel. Maximum pressures up to 40 bar. DN15 ... DN50 mm passages, flanged connections.

Discover the product
Solenoid valve 2/2 way Type BR46

Solenoid valve 2/2 way Type BR46

Piston-operated 2/2 way solenoid valve for high pressure. A minimum pressure (1 bar) between inlet and outlet is required for operation. Standard operation Norm.Closed. Norm version available. Restricted. Material Acc. Inox. Maximum pressures up to 100 bar. DN8 mm passages Threaded connections 1/4 ", 3/8", 1/2 ".

Discover the product
Solenoid valve 2/2 way Type BR2/259

Solenoid valve 2/2 way Type BR2/259

Piston-operated 2/2 way solenoid valve for very high pressures. A minimum pressure (1 bar) between inlet and outlet is required for operation. Standard operation Norm.Closed. Norm version available. Restricted. Material Acc. Inox. Maximum pressures up to 450 bar. Passages DN12, 25, 40, 50 mm. Threaded connections 1/4 " 3/8" 1/2 " 3/4" 1 " 1" 1/4, 2 "

Discover the product
Solenoid valve 2/2 way Type BR2/164

Solenoid valve 2/2 way Type BR2/164

2/2 way solenoid pilot operated solenoid valve for very high temperature fluids up to 300 ° C. Direct drive without necessary pressure between inlet and outlet. Standard operation Norm.Closed. Norm version available. Restricted. Maximum pressure 40 bar. Passages DN13, 25, 40, 50 mm. Threaded connections 1/4 ", 3/8", 1/2 ", 3/4", 1 ", 1" 1/4, 1 "1/2, 2"

Discover the product
Solenoid valve 2/2 way Type BR91K

Solenoid valve 2/2 way Type BR91K

2/2 way solenoid valve piloted for very low temperature fluids up to -196 ° C. Direct drive without necessary pressure between inlet and outlet. Operation Norm.Closed. Pressure 0 ... 16 bar. Passages DN13, 25, 40, 50 mm. Threaded connections 1/4 ", 3/8", 1/2 ", 3/4", 1 ", 1" 1/4, 1 "1/2, 2"

Discover the product
Solenoid valve 2/2 way Type 7011

Solenoid valve 2/2 way Type 7011 Natural Gas

Direct-acting 2/2-way plunger valve. Normally Closed. Threaded for single or sub-base mounting, it is used for gas and neutral fluids and is also suitable for technical vacuum. Nominal diameter up to DN 2.4 mm. Electrical protection IP65.

Discover the product
Solenoid valve 3/2 way Type 7012 Natural Gas

Solenoid valve 3/2 way Type 7012 Natural Gas

Direct-acting 3/2-way solenoid valve, Normally Closed or Open... Threaded for single or sub-base mounting, it is used for gases and neutral fluids and is also suitable for technical vacuum. Nominal diameter up to DN 1.64 mm. Brass, polyamide (PA), stainless steel body, FKM, EPDM seal. A Bürkert-specific flanged design (SFB) allows compact alignment of valves on a multiple plate. In order to have a push-fit connector technology for flexible pipes, it is possible to use pressure fittings. The ideal solution for easy direct mounting on a pneumatic actuator is an external fitting (banjo). An optional manual override allows quick commissioning and optimal maintenance. In combination with the connector form B according to the industry standard or conforming to the standard form according to DIN EN 17301- 803 form C, the valves fulfill the requirements of the degree of protection IP65.

Discover the product
Solenoid valve 3/2 way Type 6012

Proportional Solenoid valve 2/2 way Type 2871

Type 2871 2/2 way direct acting solenoid valve. Used as regulating unit in control circuits. PWM control electronics type 8605 is used to control proportional solenoid valves in the power range 40-2000 mA. Universal Controller Type 8611 is ideal for creating compact control systems. It is compatible and tested with all proportional valves and sensors from Bürkert and can be combined with any control valve from other manufacturers with standard signal (4-20 mA, 0-10 V or PWM output).

Discover the product
Solenoid valve 2/2 way Hydrogen Type 55

Solenoid valve 2/2 way Type 55 Hydrogen

2/2 way solenoid valves. Direct operated piston design. NC or NO operation. Direct drive without differential pressure. Body materials Brass or Stainless steel. Maximum pressures up to 900 bar. Passage 6 mm, threaded connections G1 / 4 "

Discover the product
Solenoid valve 3/2 way Type 75HD Hydrogen

Solenoid valve 3/2 way Type 75HD Hydrogen

3/2 way piston solenoid valves. NC or NO operation. Direct drive without differential pressure. Step from 1 to 5 mm. Body materials Brass or Stainless steel. Maximum pressures up to 300 bar. Fluid temperature -30°C ... + 80°C (version up to 180°C on request). G1 / 4 "threaded connections. ATEX version.

Discover the product
CONTACT US

For requests for information, quotes
and customized solutions

FILL IN THE FORM