Adjustable pressure switches type PS245
Low voltage electromechanical adjustable pressure switch (max 48 Volt), Normally Open or Normally Closed contacts, Screw Terminals electrical connection IP00. Key hexagonal body 24. IP65 electrical protection with CP65 protection cap supplied separately. Threaded process connections.
PRODUCT DESCRIPTION
- Range: 0,1/1; 0,2/2; 1,5/10; 9/20; 15/50; 40/80; 40/300 bar
- Maximum pressure 300 bar membrane, 600 bar piston
- Hysteresis Fixed
- Contact switches Normally Open
- Normally Closed
- Switch 0,5 (0,2) A @ 48Volt
- Electrical connectionsScrew terminal
- Working temperature -40°C ... +140°C
- Body material Zinc plated steel
- Membrane/Piston material HNBR
- Threaded process connections
- Electrical protection IP65 with CP65 cap
- For other options available see product details
Download Product details >>SUPPLY
Read the data sheet
for the standard options available for materials and process connections.
Other possible executions based on customer requests for
quantities
- Pressure switches
- calibrated up to the value indicated by the customer
- Pressure switches calibrated in descent to the value
- indicated by the customer
- Calibrated and wired pressure switches type DT06-2S, DT04-2P,
- DT06-3S, DT04-3P, SS1.5, JPT, DIN72585, M12x1
INSTALLATION and SETTING
The pressure switch must be installed preferably in a vertical position with electrical connection upwards. The pressure switch can be damaged in the presence of impacts and high vibrations creating false contacts. The pressure switches have no protection, can be protected with caps and connectors. The degree of protection can be IP 54 or IP65, depending on the type (IP 67 special versions). On request, special, already wired, pressure switches are manufactured, with body in acc. stainless steel, degreased for use with oxygen, gold contacts for low currents. Our technical office is available for the most suitable solution for your application. Particular attention to the external environment in which the pressure switches are installed. do not use the standard models in environments where there is a flammable atmosphere due to the presence of gas or other contaminations that could make the use dangerous. In these cases use the explosion-proof or protected versions. Our technical office is available to recommend the most suitable solution.